Shenzhen Yetai Optoelectronics Technology Co.,Ltd.
Model No.: 096004S0-BZ
Payment Type: T/T
LCD (Liquid Crystal Display) is a type of flat panel display which uses liquid crystals in its primary form of operation. LEDs have a large and varying set of use cases for consumers and businesses, as they can be commonly found in smartphones, televisions, computer monitors and instrument panels.
LCDs were a big leap in terms of the technology they replaced, which include light-emitting diode (LED) and gas-plasma displays. LCDs allowed displays to be much thinner than cathode ray tube (CRT) technology. LCDs consume much less power than LED and gas-display displays because they work on the principle of blocking light rather than emitting it. Where an LED emits light, the liquid crystals in an LCD produces an image using a backlight.
Model: 096004S0-BZ
Resolution: 80*160Application: smart wear, children's toys, electric meters, valve instruments, medical equipment, digital electronics, etc.
| ITEM | Sandard value | Unit |
| Model Number | TXW096004S0- |
|
| size | 0.96 | Inch |
| LCD Type | Normally black | -- |
| Drive element | TFT active matrix | -- |
| Number of pixels | 80*3RGB(H)X160(V) | Dots |
| Pixel arrangement | RGB stripe | -- |
| Active area | 10.8(H) * 21.7(V) | mm |
| LCM Mechanical Outline Size(W*H*T) | 13.5*27.95*1.5 | mm |
| Viewing direction | ALL O’CLOCK | - |
| LCM Driver IC | ST7735S | - |
| LCM interface | SPI 4 LINE Interface | - |
| Lcm pin n count | 13 |
|
| Backlight leds | 1 | pcs |
| Backlight current | 20 | ma |
| Backligh voltage | 3.2 | v |
| Operating temperature | -20+70 | ℃ |
| storage temperature | -30+80 | ℃ |
| Lumens degrees | 500-600 | Cd/㎡ |
1. Introduction
1.1 Scope of application
This specification applies to the LCD module that is supplied by Tian Xian Wei
Technology CO., LTD.
LCD specification: Dots 80xRGBx160.
As to basic specification of the driver IC, refer to the IC (Sitronix:ST7735S)
specification and data book.
All material & processing of the LCD module should be Lead Free.
1.2 TFT features:
Structure: TFT PANNEL+IC +FPC+BL;
ALL O’clock Type LCD
80 dot-segment and 160 dot-common outputs;
262K Color can be selected by software;
White LED back light;
SPI 4 Line interface
1.3 Applications:
2. LCM General specification
| ITEM | Sandard value | Unit |
| LCD Type | Normally Black | -- |
| Drive element | TFT active matrix | -- |
| Number of pixels | 80*3RGB(H)X160(V) | Dots |
| Pixel arrangement | RGB Vertical stripe
| -- |
| Pixel Pitch (W*H) | 0.135(W) × 0.1356(H) | mm |
| Active area | 10.8(W) × 21.7(H) | mm |
| Viewing direction | ALL O’CLOCK | - |
| TFT Driver IC | ST7735S |
|
| TFT interface | SPI 4 Line interface
| - |
| Module Size(W*H*T) | 13.5 (W) ×27.95(H) ×1.5(T) | mm |
| Approx. Weight | TBD | g |
| Touch structure |
|
|
| Touch Driver IC |
| - |
| Touch Interface |
|
|
3.Absolute Maximum Rating
| Characteristics | Symbol | Min. | Max. | Unit |
| LCM Operating Temperature | TOPR | -20 | +60 | °C |
| LCM Storage Temperature | TSTG | -30 | +70 | °C |
| Humidity | RH | - | 90 | % |
4.Electrical Characteristics
4.1 TFT DC Characteristics
| Characteristics | Symbol | Min. | Typ. | Max. | Unit |
| Supply Voltage for I/O | VDDIO | 1.65 | 1.8 | 3.3 | V |
| Supply Voltage for(DC/DC) | VDD | 2.5 | 2.8 | 3.3 | V |
| Supply Voltage for(DC/DC) | AVDD |
|
|
| V |
| Supply Voltage for(DC/DC) | AVEE |
|
|
| V |
| Current Consumption | IDD | - | TBD | - | mA |
| IDD-SLEEP |
| TBD |
| uA |
4.2 Back-Light Unit Characeristics
The back-light system is an edge-lighting type with 1 white LEDs. The characteristics of the back-light are shown in the following tables.
| Characteristics | Symbol | Min. | Type | Max. | Unit | Notes |
| Forward Voltage | VF | 2.8 | -- | 3.2 | V | - |
| Forward current | IF | -- | 20 | - | mA | - |
| Luminance(With LCD) | Lv | 500 | 550 | 600 | cd/m2 | - |
| LED life time | N/A | ---- | 30,000 | -- | Hr | Note 1 |
Note:
(1) The “LED life time” is defined as the module brightness decrease to 50% of original brightness at IL=20mA/LED. The LED life time could be decreased if operating IL is larger than 25mA/LED.
Backlight circuit diagram shown in below:
5. Module Function Description
6. Timing Characteristics
7.Optical Characteristics
8. Reliability Test Item
| No. | Test Item | Test Condition | Notes |
| 1 | High Temp. Storage | +70°C / 96H | 1. Functional test isOK. Missing Segment,short, unclear segment non-display,display abnormally and liquid crystal leakare un-allowed. 2. No low temperature bubbles,end seal loose andfall, frame rainbow.
|
| 2 | Low Temp. Storage | -30°C / 96H | |
| 3 | High Tempe. Operating | +60°C / 96H | |
| 4 | Low Tempe. Operating | -20°C / 96H | |
| 5 | High Temperature /Humidity storage | 50°C x 90%RH /96H | |
| 6 | Thermal and cold shock | Static state， -20℃（30min） ~60℃ （30min），50 cycles |
9. Packing Method----TBD
Product Categories : TFT LCD > 0.96 Inch TFT LCD
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now